Step 1
Identify Surface And Joint Condition
We determine whether the drive is concrete, brick, or pavers, check the joint condition, and set pressure and method accordingly.
Montgomery drives are not all poured concrete. Brick and paver entries are common here, and they need cleaning that lifts the grime without emptying the joints.
Learn More About This ServiceMontgomery's driveways reflect the town's character. Alongside conventional poured concrete you will find brick entries, paver aprons, and banded or bordered drives that were chosen to match the historic feel of the streets. Those surfaces clean up extremely well, but only at the right pressure, because a wand strong enough for concrete will blow the joint sand out of a paver drive in a single pass.
Heavy street canopy drives most of the staining regardless of material. Leaf litter left through a wet autumn leaves dark tannin marks, branch drip lines show as long stripes down the slope of the drive, and shaded stretches develop a green film that gets slick underfoot and under tire.
We match the method to the surface. Poured concrete gets an even surface-cleaner pass so it comes back uniform rather than striped. Brick and pavers get a gentler treatment that lifts the growth and staining while leaving the joints intact, and we tell you if those joints need refilling afterward.
Paver and brick drives are cleaned at a pressure that protects the joints, rather than blasted clean and left with empty seams that let stones shift.
Dark marks left by leaf litter and drip lines along tree-lined streets respond well to pre-treatment ahead of the main pass.
A rotary surface cleaner covers a concrete drive uniformly, which avoids the striped finish that wand cleaning leaves behind.
In a town where the streetscape matters, a clean entry and apron changes how the whole front of the property reads.
Step 1
We determine whether the drive is concrete, brick, or pavers, check the joint condition, and set pressure and method accordingly.
Step 2
Tannin marks, oil spotting, and the green film on shaded sections are treated before the main pass so they release properly.
Step 3
Concrete gets an even surface-cleaner pass. Brick and pavers are cleaned more gently to keep joint material where it belongs.
Step 4
Borders, edges, and steps are detailed by hand, everything is rinsed, and on pavers we tell you whether re-sanding is warranted.
I have a brick paver entry. Will cleaning ruin the joints?
Not the way we approach it. Pavers and brick get cleaned at much lower pressure than poured concrete for exactly that reason. Some sand loss is normal on any paver cleaning, and if the joints were already low we will recommend re-sanding.
Will old tannin stains under the trees come out?
Most of the way, usually. Tannin from leaf litter responds well to pre-treatment. Staining that has sat for many seasons tends to lighten substantially rather than disappear entirely, and we will tell you which you have before starting.
Why did my driveway look striped after the last cleaning?
That is the signature of wand cleaning. A pressure wand cleans in overlapping arcs that show as stripes across concrete. We use a rotary surface cleaner on poured drives, which cleans evenly edge to edge.
Should I seal the driveway afterward?
Worth considering, particularly with winter salt and heavy tree cover. On concrete see our concrete sealing page; on brick or pavers, sealing usually pairs with re-sanding the joints first.
We also offer driveway cleaning in nearby communities. Choose another area below.
Call, text, or fill out the form.
Fully insured • Free estimates • No obligation
We help homeowners across the Cincinnati area keep exterior surfaces clean, safe, and well maintained.
Service Area Map
Based in Cincinnati, we serve homeowners across Cincinnati and nearby communities.
Madeira
Loveland
Mason
West Chester
Liberty Township
Hyde Park
Pleasant Ridge
Sharonville
Milford
Batavia