Step 1
Clean And Clear The Joints
The pavers are cleaned at paver-safe pressure, and weeds, moss, and old washed-out joint material are removed from the joints.
In a town built on brick paver walkways, this is the service that matters most. Pavers do not fail at the stone. They fail at the joints.
Learn More About This ServiceMontgomery has more brick paver hardscape per property than almost anywhere in the Cincinnati area, and after enough years nearly all of it develops the same problem. Rain, runoff, downspout discharge, and repeated pressure washing carry the joint sand out a grain at a time. The bricks themselves stay perfectly sound while the thing holding them together quietly disappears.
What follows is predictable and it always arrives in the same order. Weeds and ants find the open joints first. Then the stones lose lateral support and begin to rock underfoot. Then edges creep outward, individual pavers settle low, and the walk that gave the property its character starts to read as neglected and trip-prone.
Refilling the joints with polymeric sand and sealing over it stops that cycle. Polymeric sand binds once activated so it stays put instead of washing out with the next storm, and a joint-stabilizing sealer locks it in while protecting the brick face from salt and staining. Sealing over empty joints achieves nothing, which is why we always look at joint depth before quoting.
Full, bound joints hold each paver against its neighbors, which is what prevents the rocking and settling that follows sand loss.
Weeds root in open joints and ants tunnel through loose sand. A stabilized joint removes nearly all of that opportunity.
Sealed brick sheds the road salt tracked across entries and walks instead of absorbing it into the face of the paver.
Brick paver walks are central to how Montgomery properties look. Keeping the joints right is what keeps them looking intentional.
Step 1
The pavers are cleaned at paver-safe pressure, and weeds, moss, and old washed-out joint material are removed from the joints.
Step 2
Both brick and joints need to dry fully. Under shade that takes longer, and sand or sealer over damp pavers will not set correctly.
Step 3
Polymeric sand is swept in and worked down so every joint is filled to proper depth rather than merely topped off at the surface.
Step 4
The sand is set, then a joint-stabilizing sealer is applied evenly and coverage checked across the entire surface.
How do I know if my joints need re-sanding?
Look at the depth. If you can see a noticeable gap below the top edge of the bricks, or you can sweep loose sand out with a broom, the joints are washed out. Rocking pavers and weeds coming through are the other reliable signs.
What makes polymeric sand better than regular sand?
It contains binders that harden once activated, so it stays in the joint instead of washing out like plain masonry sand. That firmer joint is what actually keeps the pavers from moving.
Can you fix a walkway where the bricks have already shifted?
Re-sanding and sealing stabilizes pavers that are still sitting at the right level. Where stones have genuinely settled or heaved, they need lifting and re-bedding first, and we will tell you plainly if that is what you are looking at.
How often should paver joints be re-done?
Every few years for most walks, sooner where a downspout discharges onto the pavers or where runoff crosses them. Fixing the water problem is often what makes the next re-sanding last.
We also offer paver sealing & re-sanding in nearby communities. Choose another area below.
Call, text, or fill out the form.
Fully insured • Free estimates • No obligation
We help homeowners across the Cincinnati area keep exterior surfaces clean, safe, and well maintained.
Service Area Map
Based in Cincinnati, we serve homeowners across Cincinnati and nearby communities.
Madeira
Loveland
Mason
West Chester
Liberty Township
Hyde Park
Pleasant Ridge
Sharonville
Milford
Batavia